
ROAD MARKING REMOVAL - RUBBER REMOVAL
ROAD RETEXTURING - SURFACE CLEANING
We are pleased to be able to offer with our friends up in the North, Road Marking Removal using ultra high pressure water jetting which incorporates vacuum recovery in a self contained jetting head. - This work can be carried out ALL over the UK
* No Smoke No Fumes unlike traditional burning off
* Acoustically shielded pressure units reducing noise and disturbance
* Vacuum recovery of jet wash water and line debris
* Leaves an undamaged clean almost dry surface
* Works on all surfaces including:-
Tarmac, Asphalt, Granite Sets, Cobbles, Block Paving, Concrete.
* Can work almost anywhere including:-
Car Parks Pedestrian Areas, Motorways Lane Marks, Country Lanes,
Forecourts, Service Areas, Runways Taxiways.
* The high pressure jetting system can remove / erase white lines and yellow lines.

* Any type of lines including paint and thermoplastic markings can be removed.
* Also can remove rubber , paint and antiskid from all types of surfaces.
White line removal, from roads, carriageways, footpaths and car parks.
White line or road marking removal without the need to use flames and so no smoke.
The low environmental impact option for road marking removal. It is clean and quick with no fumes, smoke or surface debris and uses just water!
Can remove all types of road markings, including anti-skid material, and surface applications safely and discretely from public, pedestrianised and sensitive areas.
Ability to remove markings from asphalt, concrete and block paving without damaging the surface. The hydroblaster can also retexturise asphalt surfaces to restore skid resistance and texture depth to desired levels.
There is no debris, dust, fumes or smoke. No secondary clean-up operations are required after the hydroblast process.
Removal of rubber from airport runways restores the natural skid resistance properties of a surface that have been reduced or lost by the coating of rubber.

Able to offer road marking removal using ultra high pressure water jetting which incorporates vacuum recovery in a self contained jetting head. The system works on all surfaces including Tarmac, Asphalt, Granite Sets, Cobbles, Block Paving and Concrete and the system’s versatility mean it can work almost anywhere including Car Parks, Pedestrian Areas, Motorways, Country Lanes, Forecourts, Service Areas, Runways and Taxiways. The high pressure jetting system can remove / erase white lines, yellow lines and any type of paint and thermoplastic markings can be removed. Can also remove rubber , paint and antiskid from all types of surfaces.
Removing White Liness using 2500 Bar


Remmoving Anti Skid

UHP Hydroblasting can be used to remove white lines (Painted or Thermoplastic) from road or pavement surfaces, in a quick and cost effective way.
We also offer a service to remove rubber from airport runways without damaging the underlying surface, using the power of Water Jetting.
Re-Texturing of Tarmac / Concrete is also achieved using Water Jet Technology.
We can operate 7 days a week with day, night or 24 hour shifts if required and can provide long term contracts if required.



ROAD MARKING REMOVAL - RUBBER REMOVAL
ROAD RETEXTURING - SURFACE CLEANING
Road Line Removal Removing White Lines
road,road white line removal,line removal,removing,removing,white,yellow,lines,roads,lines,rubber,car parks,streets,motor ways,tarmac,paint,forecourts,service areas,rubber,asphalt,concrete,
Able to offer road marking removal using ultra high pressure water jetting which incorporates vacuum recovery in a self contained jetting head. Works on all surfaces including Tarmac Asphalt Granite Sets Cobbles Block Paving and Concrete. Car Parks, Pedestrian Areas, Motorways, Country Lanes, Forecourts, Service Areas, Runways and Taxiways. The high pressure jetting system can remove erase white lines, yellow lines and any type of paint and thermoplastic markings can be removed. Markout can also remove rubber, paint and antiskid from all types of surfaces.